Maker’s PASS

How to make the best of your Maker’s PASS

1. Measure

   Grab your thickness gauge and measure the board precisely.

2. Generate the Test Pair

   Go here, slide to your measured thickness and get a generate a test pair.

3. Cut & Test Inserts

   Cut those pieces from a sample of your material and try the inserts.

4. Understand Inserts

   Depending on your model, you should have Tight and (in some cases) Loose Inserts sliders.

   • Tight Inserts are the ones to fit once only, during assembly, and are supposed to stay rock-solid.
   • Loose Inserts are for daily adjustments like the positions in playDesk2 and Rockpit.
5. Check Fit & Count Dots

   Check how tight and loose your inserts feel on your sample material and count the dots. Each dot in the test board ads 0.05 mm to the width of the slot (the first one is the thickness you entered in Step 2 and the last one is 0.3 mm wider).

6. Write it down

   Take note of the ones that fit perfectly for your intended use.

7. Generate & Download

   Once you’re confident with your chosen fits generate the production plans and download both files.

8. Work Your Magic 🪄

   From here on, plan the cuts, execute and style it with your own personal touch.

9. Send us photos!